Direct Fire Brew Kettle – The Pros and Cons

There are three main still heating options when it involves production. They are:

• Electric heating
• Steam heating
• Direct fireplace

• Direct Fire production

Brewing uses an open flame as a heat supply. It constantly has a furnace below the brew kettle. Compared to steam, it’s easier and cheaper to put in. compared to electrical, it’s costlier, and there are many laws to beat.

If your production is in an exceedingly small space, firing is less complicated to put in as you’ll use fuel tanks connected to the burner.

• Safety Issues of This Heating choice

As you’re| operating with an open flame, there are obvious issues of safety. There are typical issues of safety once exploitation fire:

• Turning the kettle on permits a magnet to open, resulting in the turning of the electronic pilot lightweight
• If this fails, the system entirely shuts down.
• If the pilot light is sweet, then a magnet opens to the gas sensor permitting it to flow.
• The air blower then helps feed the burner for a hot, consistent flame.

• Advantages of an on the spot fireplace Brew Kettle

1. The initial prices of putting in firing are less costly than with steam. Plus, it’s easier to calibrate too. As you only use a burner and do not like a dedicated boiler space, it also takes up less house.
2. As the burner is directly below the kettle, there isn’t any wind instrument, and no traps are required, making installation much more accessible than steam.
3. You can switch between fuel and gas if each is offered at your location, which can cause less downtime.

• Disadvantages of this Heating choice

1. There’s a more significant likelihood of caramelization with firing. This may cause off-flavours for lighter beers like lager.
2. As you utilize an open flame, you wish to examine native laws and building codes. This might slow down your path to a still gap.
3. There is a more significant likelihood of localized heating with this heating resulting in hot. If the wort becomes scorched, it makes cleanup up once a brew more difficult.

Direct Fire Kettle Conclusions

The heating choice is best once you are in remote locations or an exceedingly settled space, and a steam generator is allowed. It’s cheaper to run than electrical heating though more expensive to put in.

This heating choice is a selection for brewers who will install steam, and if the brewhouse is on top of 12HL, it might draw too much power to use electricity.

Read our blog on Consumers and Craft Beer Packaging Have a Symbiotic Relationship